Catalog
- Home
- Pumps for home and cottage
- Drainage and manure pumps
- 0.45kVt drainage pump Qmax Hmax 8.5m 200L / min
0.45kVt drainage pump Qmax Hmax 8.5m 200L / min
Overview
The pump-breather sewer 0.45kVt Hmax 8.5m Qmax 200l / min AQUATICA (773,322) These pumps are equipped with a float switch and may be used for: Handling of pure water, supplying water from open water, pumping the water from the basement, cellars, wells, reservoirs, irrigation and watering low pressure. The pumping part: - the pump body: iron / stainless steel AISI 304; - Engine Shaft: Stainless steel AISI 304; - Impeller: cast iron; - Outlet: technopolymer; - float switch provides automatic switching on and off of pumps in the series, depending on the water level. Motor: - Motor type: Asynchronous, closed type with built-in thermal protection in the winding; - the stator winding is copper; - Voltage: 220-240V; - Frequency: 50 Hz; - Insulation class: B; - Protection class: ip68. - Cable length: 6 m; - capacity: 200 l / min; - Head: 8.5 m Application conditions: -. Maximum fluid temperature +
Characteristics
Producer | AQUATICA |
Pump capacity, cu.m/hour | 12 |
Feed height, m | 8.5 |
Power capacity, kW | 0,45 |
Output pipe diameter | G2 |
Power supply | 1х220 V, 50 Hz |
Max. head, m | 8.5 |
Max.head, meter of water column | 8,5 |
Max.medium temperature, Celsius degree | 40 |
Width, mm | 150 |
Type | of a sewer |
Height, mm | 450 |
The diameter of loaded solid particles, mm | 25 |
Nom.head, m | 5 |
Max.pump flow, m3/h | 12 |
Max.flow rate, m3/h | 12 |
Max.temperature, C | 40 |
Length, mm | 225 |
Impeller material | cast iron |
Country of Origin | China |
PumpType | submersible drainage and fecal |
Drive Type | electric |
Availability of spare parts | yes |
Application | sewerage, KNS, diversion drains, treatment facilities, septic tank |
Logistics data: |