Catalog
Else categories
Pumps drainage 1.1kVt Hmax 9m Qmx 333l / min
Overview
The pump-breather sewer 1.1kW Hmax 9m Qmx 333l / min AQUATICA (773,325) These pumps are equipped with a float switch and may be used for: Handling of pure water, supplying water from open water, pumping the water from the basement, cellars, wells, reservoirs, systems irrigation and watering low pressure. The pumping part: - the pump body: iron / stainless steel AISI 304; - Engine Shaft: Stainless steel AISI 304; - Impeller: cast iron; - Outlet: technopolymer; - float switch provides automatic switching on and off of pumps in the series, depending on the water level. Motor: - Motor type: Asynchronous, closed type with built-in thermal protection in the winding; - the stator winding is copper; - Voltage: 220-240V; - Frequency: 50 Hz; - Insulation class: B; - Protection class: ip68. - Cable length: 6 m; - capacity: 333 l / min; - Head: 9 m Condition of use: - maximum liquid temperature: +40 ºC;.
Characteristics
| Producer | AQUATICA |
| Pump capacity, m3/h | 20 |
| Feed height, m | 9 |
| Power capacity, kW | 1,1 |
| Output pipe diameter | G 2" |
| Power supply | 1х220 V, 50 Hz |
| Type | of a sewer |
| Max.flow rate, m3/h | 20 |
| Max.pump flow, m3/h | 20 |
| Length, mm | 280 |
| Max.temperature, C | 40 |
| Max.medium temperature, Celsius degree | 40 |
| Max.head, meter of water column | 9 |
| Width, mm | 200 |
| The diameter of loaded solid particles, mm | 35 |
| Nom.head, m | 7.2 |
| Max. head, m | 9 |
| Height, mm | 530 |
| Impeller material | cast iron |
| Country of Origin | China |
| PumpType | submersible drainage and fecal |
| Drive Type | electric |
| Availability of spare parts | Yes |
| Application | sewerage, KNS, diversion drains, treatment facilities, septic tank |
Products from the same category
