Catalog
Else categories
The pump sewage 0.75kVt Hmax Qmax 225l 12m / min with a knife (stainless steel)
Overview
Pump sewer 0.75kVt Hmax Qmax 225l 12m / min with a knife (stainless) AQUATICA (773,432) Pumps of this series can be used for: pumping polluted liquids, which may contain foreign objects domestic use, rainwater drainage of basements, garages, wastewater from flooded land portions exhaust domestic wastewater, contaminated exhaust effluents in processes at small pumping water treatment facilities, etc. The pumping part: - Pump body: cast iron; - Engine Shaft: Stainless steel AISI 304; - Impeller: cast iron; - Outlet: iron; - float switch provides automatic switching on and off of pumps in the series, depending on the water level. Motor: - Motor type: Asynchronous, closed type with built-in thermal protection in the winding; - the stator winding is copper; - Voltage: 220-240V; - Frequency: 50 Hz; - Insulation class: B; - Degree of protection: IP68. - Cable length: 7 m; - Capacity: 22
Characteristics
| Producer | AQUATICA |
| Pump capacity, cu.m/hour | 13.5 |
| Feed height, m | 12 |
| Power capacity, kW | 0,75 |
| Output pipe diameter | G2 |
| Power supply | 1х220 V, 50 Hz |
| Type | of a sewer |
| Max.flow rate, m3/h | 13.5 |
| Length, mm | 250 |
| Max.temperature, C | 40 |
| Max.medium temperature, Celsius degree | 40 |
| Width, mm | 115 |
| The diameter of loaded solid particles, mm | 35 |
| Nom.head, m | 7 |
| Max. head, m | 12 |
| Height, mm | 395 |
| Impeller material | cast iron |
| Country of Origin | China |
| PumpType | submersible drainage and fecal |
| Drive Type | electric |
| Availability of spare parts | Yes |
| Application | sewerage, KNS, diversion drains, treatment facilities, septic tank |
Products from the same category
773434
Pre-order only
