Catalog
Else categories
The pump sewage 1.1kVt 7m Hmax Qmax 270l / min (with knife)
Overview
Pump sewer 1.1kW 7m Hmax Qmax 270l / min (with a knife) AQUATICA (773,331) These pumps are equipped with a cutting mechanism and can be used for: pumping polluted liquids, which may contain foreign objects domestic use, rainwater drainage of basements, garages, sanitation from flooded land, exhaust waste water, contaminated exhaust effluents in processes at small pumping water treatment facilities, etc. The pumping part: - the pump body: iron / stainless steel AISI 304; - Engine Shaft: Stainless steel AISI 304; - Impeller: cast iron; - Outlet: technopolymer; - Cutting mechanism: alloy steel; - float switch provides automatic switching on and off of pumps in the series, depending on the water level. Motor: - Motor type: Asynchronous, closed type with built-in thermal protection in the winding; - the stator winding is copper; - Voltage: 220-240V; - Hour
Characteristics
| Producer | AQUATICA |
| Pump capacity, cu.m/hour | 16.2 |
| Feed height, m | 7 |
| Power capacity, kW | 1,1 |
| Output pipe diameter | G2 |
| Power supply | 1х220 V, 50 Hz |
| Type | of a sewer |
| Max.flow rate, m3/h | 16.2 |
| Length, mm | 255 |
| Max.temperature, C | 40 |
| Max.medium temperature, Celsius degree | 40 |
| Width, mm | 202 |
| The diameter of loaded solid particles, mm | 10 |
| Nom.head, m | 6.4 |
| Max. head, m | 7 |
| Height, mm | 478 |
| Impeller material | cast iron |
| Country of Origin | China |
| PumpType | submersible drainage and fecal |
| Drive Type | electric |
| Availability of spare parts | Yes |
| Application | sewerage, KNS, diversion drains, treatment facilities, septic tank |
Products from the same category
