Catalog
Else categories
The pump sewage 1.5kVt 19.5m Hmax Qmax 350l / min with a knife (stainless steel)
Overview
Pump sewer 1.5kW Hmax 19.5m Qmax 350l / min with a knife (stainless) AQUATICA (773,434) These pumps are equipped with a float switch and may be used for: Handling of pure water, supplying water from open water, pumping the water from the basement, cellars, wells tanks, irrigation and water systems of low pressure. Pumping Unit: - Housing: Aluminum alloy; - Engine Shaft: Stainless steel AISI 304; - Impeller: technopolymer; - Diffuser: Cast iron; - Outlet: iron; - float switch provides automatic switching on and off of pumps in the series, depending on the water level. Motor: - Motor type: Asynchronous, closed type with built-in thermal protection in the winding; - Voltage: 220-240V; - Frequency: 50 Hz; - Insulation class: B; - Protection class: ip68. - Cable length: 7 m; - capacity: 350 l / min; - Pressure: 19.5 m; Application conditions: - Maximum liquid temperature: +40 ºC; - Depth loaders
Characteristics
| Producer | AQUATICA |
| Pump capacity, m3/h | 21 |
| Feed height, m | 19.5 |
| Power capacity, kW | 1,5 |
| Output pipe diameter | G 2" |
| Power supply | 1х220 V, 50 Hz |
| Type | of a sewer |
| Max.flow rate, m3/h | 21 |
| Length, mm | 250 |
| Max.temperature, C | 40 |
| Max.medium temperature, Celsius degree | 40 |
| Width, mm | 155 |
| The diameter of loaded solid particles, mm | 35 |
| Nom.head, m | 11 |
| Max. head, m | 19.5 |
| Height, mm | 470 |
| Impeller material | cast iron |
| Country of Origin | China |
| PumpType | submersible drainage and fecal |
| Drive Type | electric |
| Availability of spare parts | Yes |
| Application | sewerage, KNS, diversion drains, treatment facilities, septic tank |
Products from the same category
