Catalog
Else categories
Metal Pall Ring, AISI 304, 25x25x0.5 mm
Documentation
Download instructions, catalog for Metal Pall Ring, AISI 304, 25x25x0.5 mm
Overview
It is one of the most common and well-known packing. It is made of a metal thin sheet and have special structure, there are two row window with ligules towards inside on the ring wall, each row window has five ligules bend to inside of the ring and point to center, at which the ligules touch each other, the position of up and down window is stagger, usually the area of window is about 30% of the whole ring area. The window on the ring wall let distribution and mass transfer efficiency of liquid and gas inside packing better than Raschig Ring.
Characteristics
| Producer | BTS Engineering |
| Material | AISI 304 stainless steel |
| Diameter, mm | 25 |
| Nozzle type | Pall Ring |
| Specific surface area, m2/m3 | 219 |
| Dimensions, mm | 25x25x0,5 |
| Void factor, % | 95 |
| Quantity m.cubic | 55 880 |
| Application | absorber, dehydration, calciner, desorber, distillation, rectification, water saturation, packed columns, gas cleaning |
| Analogue for | Christy Catalytics, НКС DOLSIN, AMACS, Ultimo Engineers, MTE, Pall Ring Company, MACH Engineering LLC, Munters, Koch-Glitsch |
Products from the same category
