Catalog
Mechanical Seal R-MG1 28, SIC/SIC, EPDM, 304, G6
- Overview
- Characteristics
- Reviews0
Single End seal MG1, with an elastomeric bellows, unbalanced, with a central spring, independent of the direction of rotation of the shaft. Used in centrifugal pumps, mixers and other equipment, it is particularly recommended for the media, which contain solids (e.g., sewage).
Apply at temperatures from -20 to + 140°C, pressures up to 1.6 MPa and the rotation speed to 10 m/sec.
Possible use in pumps Alfa Laval, Ebara (3M, DWO), Lowara, KSB (Etanorm, Etachrom), WILO (MVI, MHI, IPL / DPL), Grundfos (CDM), Saer (IP), Calpeda (GM, MXS) , Gnome, KM, DAB, Johnson Pump, Foras, Zenit (DTRT) and others.
Analog mechanical seals: Burgmann MG1, AESSEAL B09U / B02, Flowserve Pac-Seal 190, ROTEN L3, Vulcan Type 19, ANGA A1, Sterling SMG1, Sealant 212.N2.
Mechanical seal for Wilo pump, K, KM, X, AH, AHP, AH, Calpeda, DAB, Ebara, Grundfos, pump KSB, Allweiler, SALMSON, ACD Cryo, Flygt, IMP Pumps, LOWARA, PENTAX, Foras, Fristam, pump SPERONI, ZENIT, Inoxpa, JL, Johnson pump, KOLMEKS, Pedrollo, SAER, Vulcan, WQ, WQK, pump Tuchenhagen, ALFA LAVAL, Donjoy, Mission Magnum.
| Producer | BTS Engineering |
| Width of transport packing, cm | 8 |
| Type of conta-ring | G6 |
| Pressure | 1,6 mPa |
| Gross weight, kg | 0.25 |
| Operating temperature | -20°C + 140°C |
| Height of transport packing, cm | 10 |
| Seal type | MG1 |
| Rubber type | EPDM |
| Material of metal part | 304 |
| Shaft diameter | 28 |
| Analogue for | Burgmann MG1, AESSEAL B02, Flowserve 190, Roten L3, Vulcan 19, Anga A1, Sterling SMG1, Lidering M212.N2, DIMER TCP.1-60, Latty T700 |
| Length of transport packing, cm | 8 |
| Rotation velocity | 10 m/s |
| Stationary and rotating face | SIC/SIC |
| Application | EMAUX, Alfa Laval, CNP, DAB, DWO, Ebara, ERDURO, Evroaqua, Foras, Grundfos, Hidrostal, Hydro-Vacuum S.A., IRG, Johnson pump, KM, KMЛ, KSB, Mas Daf, Pe |