Catalog
Else categories
Metal bellows seal for pump shaft R-MFL85N 38, CAR/SIC, VITON, 316, G9
$-41
Overview
Single unloaded mechanical seal R-MFL85N is used at temperatures from -40 to + 220°C, with a pressure of up to 2.5 MPa and a rotation speed of up to 20 m/s. With an arbitrary direction of shaft rotation and a metal welded bellows, R-MFL85N is designed for operation in conditions of ultra-high temperatures and viscous media. Mechanical seal for Wilo, K, KM, X, AX, AXP, AX, Calpeda, DAB, Ebara, Grundfos pumps, for KSB pumps, Allweiler, SALMSON, ACD Cryo, Flygt, IMP Pumps, LOWARA, PENTAX, Foras, Fristam pumps, for SPERONI pumps, ZENIT, Inoxpa, JL, Johnson pump, KOLMEKS, Pedrollo, SAER, Vulcan, WQ, WQK, for Tuchenhagen pumps, ALFA LAVAL, Donjoy, Mission Magnum.
Characteristics
| Outer diameter of the fixed ring, mm | 56 |
| Type of conta-ring | G9 |
| Shaft diameter | 38 |
| Producer | BTS Engineering |
| Stationary and rotating face | CAR/SIC |
| Material of metal part | AISI 316 stainless steel |
| Pressure | 2.5 MPa |
| Rotation velocity | 15 m/s |
| Operating temperature | -20°C +260°C |
| Seal type | R-MFL85N |
| Rubber type | VITON |
| Application | WILO |
| Analogue for | Burgmann MFL85N, Chesterton 886, John Crane 680, Latty B17, LIDERING LMB85 |
| Gross weight, kg | 0.35 |
| Length of transport packing, cm | 6,5 |
| Width of transport packing, cm | 6,5 |
| Height of transport packing, cm | 6,5 |
How to properly measure a mechanical seal
Products from the same category
$-35
$-37
$-62
$-65
$-68
