Catalog
Else categories
Multi-spring pump shaft seal R-58U 50, CAR/SIC, EPDM, 304, BO
$-11
Overview
Mechanical seal R-58U - multi-spring unbalanced seal with O-ring. This seal is used in various industries, including marine equipment, agitators, mixers, compressors. Rotation is carried out in any direction. The rotating part is installed with tension on the rubber bellows, which allows you to install the seal in the desired location using a locking screw. Analogue of mechanical seals: John Crane 58U, Burgmann BT-C5.KU, AESSEAL M03S, Vulcan 1659S, Sterling 259S. Used at temperatures from -40 to + 200°C, with a pressure of up to 2.4 MPa and a rotation speed of 25 m/sec. Mechanical seal for Wilo, K, KM, X, AX, AXP, AX, Calpeda, DAB, Ebara, Grundfos pumps, for KSB, Allweiler, SALMSON, ACD Cryo, Flygt, IMP Pumps, LOWARA, PENTAX, Foras, Fristam pumps, for SPERONI, ZENIT, Inoxpa, JL, Johnson pump, KOLMEKS, Pedrollo, SAER, Vulcan, WQ, WQK pumps, for Tuchenhagen, ALFA LAVAL, Donjoy, Mission Magnum pumps.
Characteristics
| Outer diameter of the fixed ring, mm | 70 |
| Type of conta-ring | BO |
| Shaft diameter | 50 |
| Producer | BTS Engineering |
| Stationary and rotating face | CAR/SIC |
| Material of metal part | AISI 304 stainless steel |
| Pressure | 2.4 MPa |
| Rotation velocity | 25 m / s |
| Operating temperature | -40°C +200°C |
| Seal type | R-58U |
| Rubber type | EPDM |
| Application | Hydro-Vacuum SA, LEISTRITZ PUMPEN GMBH |
| Analogue for | AESSEAL M03SU, AESSEAL M03S, Anga VB, Burgmann BT-C5.KU, John Crane 58U, LIDERING LMS20, Sterling 259S, US SEAL W, Vulcan 1659S |
| Gross weight, kg | 0.5 |
| Length of transport packing, cm | 8 |
| Width of transport packing, cm | 8 |
| Height of transport packing, cm | 6,5 |
How to properly measure a mechanical seal
Products from the same category
$-11
$-11
$-11
$-17
