Catalog
Else categories
Mechanical seal for pump shaft R-MFL WT80 53, CAR/SIC, PTFE, 316 type JOHN CRANE 606, BURGMANN MFLWT
$-53
Overview
The single mechanical seal R-MFL WT80 (606, 680W, MB-B04) with a welded metal bellows is used at temperatures from -20 to + 400°C, with a pressure of up to 2.5 MPa and a rotational speed of up to 15 m/s. Independent of the direction of rotation of the shaft, the unloaded seal R-MFL WT80 is designed to operate in conditions of extremely high temperatures and viscous media. Mechanical seal for pump Wilo, K, KM, X, AH, AHP, AH, Calpeda, DAB, Ebara, Grundfos, for pump KSB, Allweiler, SALMSON, ACD Cryo, Flygt, IMP Pumps, LOWARA, PENTAX, Foras, Fristam, for pump SPERONI, ZENIT, Inoxpa, JL, Johnson pump, KOLMEKS, Pedrollo, SAER, Vulcan, WQ, WQK, for pumps Tuchenhagen, ALFA LAVAL, Donjoy, Mission Magnum.
Characteristics
| Outer diameter of the fixed ring, mm | 78 |
| Shaft diameter | 53 |
| Producer | BTS Engineering |
| Stationary and rotating face | CAR/SIC |
| Material of metal part | AISI 316 stainless steel |
| Pressure | 2.5 MPa |
| Rotation velocity | 15 m/s |
| Operating temperature | -20°C +400°C |
| Seal type | R-MFL WT80 |
| Rubber type | PTFE |
| Analogue for | Burgmann MFLWT, John Crane 606 |
| Gross weight, kg | 0.5 |
| Length of transport packing, cm | 8 |
| Width of transport packing, cm | 8 |
| Height of transport packing, cm | 6,5 |
How to properly measure a mechanical seal
Products from the same category
$-25
$-50
$-28
$-30
$-32
$-55
