Catalog
Else categories
Mechanical seal for pump R-BIA 65, CAR/SIC, EPDM, 304, T1B
$-8
Overview
Single mechanical seal with open spring R-BIA is used at temperatures from -40 to + 120°C, with pressure up to 1.5 MPa and rotation speed up to 13 m/s. Analogue of Burgmann BIA seals. Mechanical seal for Wilo, K, KM, X, AX, AXP, AX, Calpeda, DAB, Ebara, Grundfos pump, for KSB pump, Allweiler, SALMSON, ACD Cryo, Flygt, IMP Pumps, LOWARA, PENTAX, Foras, Fristam, for SPERONI pump, ZENIT, Inoxpa, JL, Johnson pump, KOLMEKS, Pedrollo, SAER, Vulcan, WQ, WQK, for Tuchenhagen pump, ALFA LAVAL, Donjoy, Mission Magnum.
Characteristics
| Outer diameter of the fixed ring, mm | 85 |
| Type of conta-ring | T1B |
| Shaft diameter | 65 |
| Producer | BTS Engineering |
| Stationary and rotating face | CAR/SIC |
| Material of metal part | AISI 304 stainless steel |
| Pressure | 1.5 MPa |
| Rotation velocity | 13 m/s |
| Operating temperature | -20°C + 150°C |
| Seal type | R-BIA |
| Rubber type | EPDM |
| Application | ASTA, SAER, CSN |
| Gross weight, kg | 0.4 |
| Length of transport packing, cm | 9,5 |
| Width of transport packing, cm | 9,5 |
| Height of transport packing, cm | 6,5 |
How to properly measure a mechanical seal
Products from the same category
$-8
$-8
$-8
$-9
$-10
$-10
