Catalog
Else categories
Mechanical seal for pump shaft R-10R 3/4, SIC/SIC, PTFE, 304, V
$-5
Documentation
Download instructions, catalog for Mechanical seal for pump shaft R-10R 3/4, SIC/SIC, PTFE, 304, V
Overview
The mechanical seal for the shaft of chemical pumps R-10R is used at temperatures from -20 to + 220°C, with a pressure of up to 0.8 MPa and a rotation speed of up to 13 m/sec. It has maximum corrosion resistance. An analogue of the seals John Crane 10R, 113, 153/153, is used to replace oil seals in chemical pumps X, XM, AX, etc. The stationary part is made of ceramics with fluoroplastic gaskets. The friction pair ring of the stationary part is replaceable, unlike the R-10T type (thanks to this, the R-10T can operate at higher static and pulsating pressures). Mechanical seal for pump Wilo, K, KM, X, AH, AHP, AH, Calpeda, DAB, Ebara, Grundfos, for pump KSB, Allweiler, SALMSON, ACD Cryo, Flygt, IMP Pumps, LOWARA, PENTAX, Foras, Fristam, for pump SPERONI, ZENIT, Inoxpa, JL, Johnson pump, KOLMEKS, Pedrollo, SAER, Vulcan, WQ, WQK, for pumps Tuchenhagen, ALFA LAVAL, Donjoy, Mission Magnum.
Characteristics
| Type of conta-ring | V |
| Shaft diameter | 3/4" |
| Producer | BTS Engineering |
| Stationary and rotating face | SIC/SIC |
| Material of metal part | AISI 304 stainless steel |
| Rotation velocity | 13 m/s |
| Pressure | 0,8 MPa |
| Operating temperature | -20°C + 120°C |
| Seal type | R-10R |
| Rubber type | PTFE |
| Analogue for | AESSEAL B08, Anga 11, Corropac 30, Fluiten ES, John Crane 10R |
| Gross weight, kg | 0.1 |
| Length of transport packing, cm | 5,5 |
| Width of transport packing, cm | 5 |
| Height of transport packing, cm | 5 |
How to properly measure a mechanical seal
Products from the same category
$-6
$-6
$-12
$-10
10550_1.3/8__CAR/SIC__PTFE__304__V
In stock