Catalog
Else categories
Mechanical seal for pump shaft R-10T 1.5/8, SIC/SIC, PTFE, 304, V
$-11
Documentation
Download instructions, catalog for Mechanical seal for pump shaft R-10T 1.5/8, SIC/SIC, PTFE, 304, V
Overview
Mechanical seal R-10T with PTFE bellows is intended for use in aggressive environments: strong acids, organic compounds, salt solutions, chemically active compounds. Intended for outdoor installation. Has maximum corrosion resistance. Analogue of John Crane 10T, 113, 153/153 seals, used to replace seals in chemical pumps X, XM, AX, etc. The stationary part is made of ceramics with fluoroplastic gaskets. The friction pair ring of the stationary part is unchanged, unlike the R-10R type (thanks to this, the R-10T can operate at higher static and pulsating pressure). Used at temperatures from -20 to + 220°C, with a pressure of up to 1.3 MPa and a rotation speed of up to 16m/sec. Mechanical seal for pump Wilo, K, KM, X, AH, AHP, AH, Calpeda, DAB, Ebara, Grundfos, for pump KSB, Allweiler, SALMSON, ACD Cryo, Flygt, IMP Pumps, LOWARA, PENTAX, Foras, Fristam, for pump SPERONI, ZENIT, Inoxpa, JL, Johnson pump, KOLMEKS, Pedrollo, SAER, Vulcan, WQ, WQK, for pumps Tuchenhagen, ALFA LAVAL, Donjoy, Mission Magnum.
Characteristics
| Type of conta-ring | V |
| Shaft diameter | 1.5/8" |
| Producer | BTS Engineering |
| Stationary and rotating face | SIC/SIC |
| Material of metal part | AISI 304 stainless steel |
| Pressure | 0,8 MPa |
| Rotation velocity | 13 m/s |
| Operating temperature | from -20 to +120 |
| Seal type | R-10T |
| Rubber type | PTFE |
| Analogue for | AESSEAL B08, Anga A10, Corropac 30, Flowserve TBR, Fluiten ES, John Crane 10T, LIDERING LTB16 |
| Gross weight, kg | 0.1 |
| Length of transport packing, cm | 6,5 |
| Width of transport packing, cm | 6,5 |
| Height of transport packing, cm | 6 |
How to properly measure a mechanical seal
Products from the same category
$-9
$-10
$-10
$-12
$-13
$-13
