Catalog
Else categories
PTFE Bellows Mechanical Seal for Pump R-152R 35, PTFE/CER, PTFE
$-14
Overview
Mechanical shaft seal R-152R is used at temperatures from -20 to + 220°C, with a pressure of up to 0.5 MPa and a rotation speed of up to 3000 rpm. Resistant to severe corrosion and high concentrations of acids, salts, strong oxidants and chemically active organic compounds. Designed for outdoor installation. Used to replace oil seals in chemical pumps X, XM, AX, etc. The stationary part is made of ceramics with fluoroplastic gaskets. Mechanical seal for pump Wilo, K, KM, X, AH, AHP, AH, Calpeda, DAB, Ebara, Grundfos, for pump KSB, Allweiler, SALMSON, ACD Cryo, Flygt, IMP Pumps, LOWARA, PENTAX, Foras, Fristam, for pump SPERONI, ZENIT, Inoxpa, JL, Johnson pump, KOLMEKS, Pedrollo, SAER, Vulcan, WQ, WQK, for pumps Tuchenhagen, ALFA LAVAL, Donjoy, Mission Magnum.
Characteristics
| Shaft diameter | 35 |
| Producer | BTS Engineering |
| Stationary and rotating face | PTFE/CER |
| Rate of turn, rpm | 3 000 |
| Pressure | 0.5 MPa |
| Operating temperature | from -20 to +120 |
| Seal type | R-152R |
| Rubber type | PTFE |
| Analogue for | AESSEL B08, Anga 11, Corropac 30, Fluiten ES, John Crane 10R |
| Gross weight, kg | 0.35 |
| Length of transport packing, cm | 6,5 |
| Width of transport packing, cm | 6,5 |
| Height of transport packing, cm | 6,5 |
How to properly measure a mechanical seal
Products from the same category
$-12
$-14
$-21
$-30
