Catalog
Else categories
Mechanical seal R-560C 65, CAR/SIC, EPDM, 304, T1S43
$-9
Overview
Mechanical shaft seal R-560C is a single seal used at temperatures from -20 to + 150°C, with a pressure of up to 1.8 MPa and a rotation speed of up to 13 m/s. It is used in centrifugal pumps, turbine pumps, compressors, hot water pumps, agitators, mixers and other equipment for the oil, chemical and food industries. It can be used in pumps: Pedrollo, JL, JLM, SAER. Analogue of mechanical seals: Sealol Type43, Vulcan Tupe24. Mechanical seal for pump Wilo, K, KM, X, AH, AHP, AH, Calpeda, DAB, Ebara, Grundfos, for pump KSB, Allweiler, SALMSON, ACD Cryo, Flygt, IMP Pumps, LOWARA, PENTAX, Foras, Fristam, for pump SPERONI, ZENIT, Inoxpa, JL, Johnson pump, KOLMEKS, Pedrollo, SAER, Vulcan, WQ, WQK, for pumps Tuchenhagen, ALFA LAVAL, Donjoy, Mission Magnum.
Characteristics
| Outer diameter of the fixed ring, mm | 85 |
| Type of conta-ring | T1S43 |
| Shaft diameter | 65 |
| Producer | BTS Engineering |
| Stationary and rotating face | CAR/SIC |
| Material of metal part | AISI 304 stainless steel |
| Rotation velocity | 13 m/s |
| Pressure | 1.5 MPa |
| Operating temperature | -20°C + 150°C |
| Seal type | R-560C |
| Rubber type | EPDM |
| Application | WILO |
| Analogue for | Burgmann EA560 |
| Gross weight, kg | 0.4 |
| Length of transport packing, cm | 9,5 |
| Width of transport packing, cm | 9,5 |
| Height of transport packing, cm | 6,5 |
How to properly measure a mechanical seal
Products from the same category
$-7
$-8
$-8
$-9
$-9
$-10
