Catalog
Else categories
Mechanical seal for Grundfos Sarlin R-706SP 32 pump, SIC/SIC, VITON, 304
$-6
Overview
Primary mechanical seal for Grundfos Sarlin R-706SP - for submersible pumps of the S-series. R-706SP - multi-spring, unloaded, used as a lower seal, with two sealing O-rings and characteristic recesses of the stationary part. Type: Primary shaft seal YJ3458665, spare part, Kit, Shaft Seal PRIMARY SHAFT SEAL – 96567358, Vulcan 42, Aesseal M01SA, Roplan 210 In Grundfos S1, S2, S3 pumps, tandem (together with R-706SS) seals are used for the following shaft diameter combinations: 32 mm / 38 mm 38 mm / 50 mm 50 mm / 65 mm 65 mm / 65 mm Temperature: -30 ° ~ 200 ° Pressure: ≤2.5 MPa Speed: ≤15 m / sec Materials Moving part: SIC Fixed ring: SIC Bellows: VITON Spring: SS304 / SS316 Metal parts: SS304 / SS316
Characteristics
| Outer diameter of the fixed ring, mm | 48 |
| Shaft diameter | 32 |
| Producer | BTS Engineering |
| Stationary and rotating face | SIC/SIC |
| Material of metal part | AISI 304 stainless steel |
| Pressure | 2.5 MPa |
| Rotation velocity | 15 m/s |
| Operating temperature | -30°C +200°C |
| Seal type | R-706SP |
| Rubber type | VITON |
| Application | Grundfos |
| Gross weight, kg | 0.35 |
| Length of transport packing, cm | 6,5 |
| Width of transport packing, cm | 6,5 |
| Height of transport packing, cm | 6,5 |
How to properly measure a mechanical seal
Products from the same category
$-5
$-7
$-10
$-13
$-13
29006_65__SIC/SIC__VITON__304
In stock
$-19
29006_95__SIC/SIC__VITON__304
Pre-order only