Catalog
Else categories
Cartridge seal for pump R–Convertor 75, SIC/SIC, VITON, 304
$-90
Overview
The R-Convertor single cartridge seal is used to replace conventional component seals and stuffing boxes of pumps, mixers, compressors. Independent of the direction of shaft rotation, it has a hydraulically relieved friction pair, which allows the seal to be used in fairly high pressure ranges. The R-Convertor seal springs do not contact the product, so this cartridge can be used for highly viscous media. The seal is attached to the stuffing box with two studs, the orientation is horizontal, no flushing holes are provided. Analogue - AESSEAL Convertor II ™ Temperature: -40 ° ~ 220 ° Pressure: ≤2.5 MPa Speed: ≤20 m / sec Materials: - Moving ring: SiC / TC / Carbon - Fixed ring: SiC / TC. - Secondary seal: VITON / PTFE / NBR / EPDM. - Other parts: SUS304 / SUS316 / Titanium / Hastelloy-C
Characteristics
| Shaft diameter | 75 |
| Producer | BTS Engineering |
| Stationary and rotating face | SIC/SIC |
| Material of metal part | AISI 304 stainless steel |
| Pressure | 2.5 MPa |
| Rotation velocity | 20 m/s |
| Operating temperature | -40°C +220°C |
| Seal type | R-Convertor |
| Rubber type | VITON |
| Analogue for | AESSEAL Convertor II™ |
| Gross weight, kg | 1.1 |
| Length of transport packing, cm | 10,5 |
| Width of transport packing, cm | 10,5 |
| Height of transport packing, cm | 10,5 |
How to properly measure a mechanical seal
Products from the same category
$-78
$-81
$-84
$-95
$-102
$-108
