Catalog
Else categories
Mechanical shaft seal R-H12N 12, CAR/SIC, EPDM, 304, G9 type BURGMANN H12N/H17GN, AESSEAL T01DB, T01DBU
$-3
Overview
Single mechanical seal, unloaded, with conical spring R-H12N for stepped shafts is used at temperatures from -40 to + 220°C, with pressure up to 2.5 MPa and speed up to 15 m/sec. Depends on the direction of rotation of the shaft. Used mainly in chemical pumps and water pumps. Analog: Burgmann H12N / H12GN (with hot-pressed moving ring), AESSEAL T01DBU / T01DB, Hecker HN430N. Mechanical seal for pump Wilo, K, KM, X, AH, AHP, AH, Calpeda, DAB, Ebara, Grundfos, for pump KSB, Allweiler, SALMSON, ACD Cryo, Flygt, IMP Pumps, LOWARA, PENTAX, Foras, Fristam, for pump SPERONI, ZENIT, Inoxpa, JL, Johnson pump, KOLMEKS, Pedrollo, SAER, Vulcan, WQ, WQK, for pumps Tuchenhagen, ALFA LAVAL, Donjoy, Mission Magnum.
Characteristics
| Outer diameter of the fixed ring, mm | 23 |
| Type of conta-ring | G9 |
| Shaft diameter | 12 |
| Producer | BTS Engineering |
| Stationary and rotating face | CAR/SIC |
| Material of metal part | AISI 304 stainless steel |
| Rotation velocity | 15 m/s |
| Pressure | 2.5 MPa |
| Operating temperature | -40°C +220°C |
| Seal type | R-H12N |
| Rubber type | EPDM |
| Application | KSB, Pentax |
| Analogue for | AESSEAL T01DBU, AESSEAL T01DB, Burgmann H12N/H17GN |
| Gross weight, kg | 0.1 |
| Length of transport packing, cm | 5,5 |
| Width of transport packing, cm | 5 |
| Height of transport packing, cm | 5 |
How to properly measure a mechanical seal
Products from the same category
$-9
$-3
$-3
$-4
$-9
$-18
