Catalog
Else categories
Mechanical seal for pump shaft R-H75 30, CAR/SIC, EPDM, 304, G9
$-8
Documentation
Download instructions, catalog for Mechanical seal for pump shaft R-H75 30, CAR/SIC, EPDM, 304, G9
Overview
Mechanical seal for shaft R-H75 - single, unloaded, independent of the direction of rotation of the shaft. Dimensions correspond to R-H7N, but with a multi-spring block in a protective sleeve. For shaft diameters from 28 to 200 mm. Analogs: AESSEALW07DMBU / W07DMBU, BurgmannH75. Combinations of a cooled counter ring (G115), with a solid moving ring made of carbon graphite (for use in volatile hydrocarbon environments H 75 VN, in accordance with the requirements for low-emission seals) are possible. Temperature: -50 °C ~ 220 °C Pressure: ≤2.5 MPa Speed: ≤20 m/sec Materials: 1 Moving ring: SiC / TC / Carbon / SS. 2 Stationary ring: Carbon / SiC / TC. 3 Bellows: VITON / EPDM / FEP. 4 Spring: SS304 / SS316. 5 Metal parts: SS304 / SS316 Mechanical seal for pump Wilo, K, KM, X, AH, AHP, AH, Calpeda, DAB, Ebara, Grundfos, for pump KSB, Allweiler, SALMSON, ACD Cryo, Flygt, IMP Pumps, LOWARA, PENTAX, Foras, Fristam, for pump SPERONI, ZENIT, Inoxpa, JL, Johnson pump, KOLMEKS, Pedrollo, SAER, Vulcan, WQ, WQK, for Tuchenhagen, ALFA LAVAL, Donjoy, Mission Magnum pump.
Characteristics
| Outer diameter of the fixed ring, mm | 45 |
| Type of conta-ring | G9 |
| Shaft diameter | 30 |
| Producer | BTS Engineering |
| Stationary and rotating face | CAR/SIC |
| Material of metal part | AISI 304 stainless steel |
| Pressure | 2.5 MPa |
| Rotation velocity | 20 m/s |
| Operating temperature | -40°C +220°C |
| Seal type | R-H75 |
| Rubber type | EPDM |
| Application | LOWARA |
| Analogue for | Burgmann H75 |
| Gross weight, kg | 0.3 |
| Length of transport packing, cm | 5,5 |
| Width of transport packing, cm | 5,5 |
| Height of transport packing, cm | 5 |
How to properly measure a mechanical seal
Products from the same category
$-7
$-8
$-8
$-10
$-11
$-19
1026940_50__SS/CAR__VITON__304__G9
Pre-order only