Catalog
Else categories
Mechanical seal R-JB104 50, CAR/SIC, EPDM, 304, T4С
$-16
Overview
Mechanical seal R-JB104 with protected spring is used at temperatures from -40 to + 120°C, with pressure up to 0.8 MPa and rotation speed up to 10 m/s. Mechanical seal for Wilo, K, KM, X, AX, AXP, AX, Calpeda, DAB, Ebara, Grundfos pump, for KSB pump, Allweiler, SALMSON, ACD Cryo, Flygt, IMP Pumps, LOWARA, PENTAX, Foras, Fristam, for SPERONI pump, ZENIT, Inoxpa, JL, Johnson pump, KOLMEKS, Pedrollo, SAER, Vulcan, WQ, WQK, for Tuchenhagen pump, ALFA LAVAL, Donjoy, Mission Magnum.
Characteristics
| Outer diameter of the fixed ring, mm | 70 |
| Type of conta-ring | T4С |
| Shaft diameter | 50 |
| Producer | BTS Engineering |
| Stationary and rotating face | CAR/SIC |
| Material of metal part | AISI 304 stainless steel |
| Pressure | 0,8 MPa |
| Rotation velocity | 10 m/s |
| Operating temperature | -20°C + 80°C |
| Seal type | R-JB104 |
| Rubber type | EPDM |
| Gross weight, kg | 0.5 |
| Length of transport packing, cm | 8 |
| Width of transport packing, cm | 8 |
| Height of transport packing, cm | 6,5 |
How to properly measure a mechanical seal
Products from the same category
$-19
$-6
$-7
$-16
