Catalog
Else categories
Mechanical seal for pump shaft KSB R-MG1S6 10, SIC/SIC, VITON, 304
$-1
Documentation
Download instructions, catalog for Mechanical seal for pump shaft KSB R-MG1S6 10, SIC/SIC, VITON, 304
Overview
Mechanical seal for pump shaft KSB R-MG1S6 with central spring, bellows type, independent of the direction of rotation of the shaft. For internal location and operation in low-viscosity liquids with a small content of abrasives. Standards EN 12756. Used in KSB pumps. Type: Burgmann MG1S6, KSB NU028, DIN KSB-ZN118, NU028SO-1 ZN1181, MG1S6 / 28-G61, AESSEAL B02K, Flowserve KZN, Vulcan 192K. Temperature: -20 ° ~140 ° Pressure: ≤1.6 MPa Speed: ≤10 m / sec Material • Rotating ring: CAR / SIC • Stationary ring: SIC. • Bellows: NBR / EPDM / VITON. • Spring: SS304 / SS316. • Metal parts: SS304 / SS316
Characteristics
| Outer diameter of the fixed ring, mm | 19,6 |
| Shaft diameter | 10 |
| Producer | BTS Engineering |
| Stationary and rotating face | SIC/SIC |
| Material of metal part | AISI 304 stainless steel |
| Pressure | 1,6 mPa |
| Rotation velocity | 10 m/s |
| Operating temperature | -20°C + 140°C |
| Seal type | R-MG1S6 |
| Rubber type | VITON |
| Application | KSB |
| Analogue for | Burgmann MG1S6, KSB NU028, Vulcan 192K, Flowserve KZN, AESSEAL B02K |
| Gross weight, kg | 0.1 |
| Length of transport packing, cm | 5,5 |
| Width of transport packing, cm | 5 |
| Height of transport packing, cm | 5 |
How to properly measure a mechanical seal
Products from the same category
$-1
$-1
$-3
$-3
$-4
$-8
35097_48__SIC/SIC__VITON__304
Pre-order only