Catalog
Else categories
Pump shaft mechanical seal KSB R-MG1S6 28, CAR/SIC, EPDM, 304
$-2.95
Documentation
Download instructions, catalog for Pump shaft mechanical seal KSB R-MG1S6 28, CAR/SIC, EPDM, 304
Overview
The mechanical shaft seal of the KSB R-MG1S6 pump with a central spring, bellows type, does not depend on the direction of rotation of the shaft. For internal arrangement and operation in low-viscosity liquids with a low content of abrasives.
EN 12756 standards.
It is used in KSB pumps.
Type: Burgmann MG1S6, KSB NU028, DIN KSB-ZN118, NU028SO-1 ZN1181, MG1S6 / 28-G61, AESSEAL B02K, Flowserve KZN, Vulcan 192K.
Temperature: -20°~140°
Pressure: ≤1.6 MPa
Speed: ≤10 m/sec
Materials
• Rotating Ring: CAR/SIC
• Fixed ring: SIC.
• Bellows: NBR/ EPDM/ VITON.
• Spring: SS304 / SS316
• Metal parts: SS304 / SS316.
Characteristics
| Producer | BTS Engineering |
| Shaft diameter | 28 |
| Rubber type | EPDM |
| Stationary and rotating face | CAR/SIC |
| Material of metal part | 304 |
| Pressure | 1,6 mPa |
| Rotation velocity | 10 m/s |
| Operating temperature | -20°C + 140°C |
| Seal type | R-MG1S6 |
| Application | KSB |
| Analogue for | KSB NU028, Burgmann MG1S6, Vulcan 192K, Flowserve KZN, AESSEAL B02K |
| Gross weight, kg | 0.25 |
| Length of transport packing, cm | 8 |
| Width of transport packing, cm | 8 |
| Height of transport packing, cm | 10 |
How to properly measure a mechanical seal
Products from the same category
$-1.29
35097_10__SIC/SIC__VITON__304
Pre-order only
$-1.94
35097_15__SIC/SIC__VITON__304
Pre-order only
$-2.01
35097_16__SIC/SIC__VITON__304
Pre-order only
$-3.54
$-4.84
35097_38__SIC/SIC__VITON__304
Pre-order only
$-9.83
35097_48__SIC/SIC__VITON__304
Pre-order only