Catalog
Else categories
Mechanical seal for chemical pump QHB with PTFE bellows R-WB3 25, L, CAR/SIC, VITON, 304
Documentation
Download instructions, catalog for Mechanical seal for chemical pump QHB with PTFE bellows R-WB3 25, L, CAR/SIC, VITON, 304
Overview
Mechanical seal with PTFE bellows R-WB3 - single, unbalanced. For external installation, independent of the direction of rotation of the shaft. It is used at temperatures from - 20ºC to +180ºC, with pressures up to 0.8 MPa and rotational speeds up to 10 m/s.
The R-WB3 mechanical seal is installed on Qeehua's QHB series chemical pumps and other chemical pumps.
Characteristics
| Shaft diameter | 25 |
| Producer | BTS Engineering |
| Stationary and rotating face | CAR/SIC |
| Material of metal part | AISI 304 stainless steel |
| Pressure | 0,8 MPa |
| Rotation velocity | 10 m/s |
| Operating temperature | 20°C +180°C |
| Seal type | R-WB3 |
| Rubber type | VITON |
| Application | Qeehua |
Video Mechanical seal for chemical pump QHB with PTFE bellows R-WB3 25, L, CAR/SIC, VITON, 304
How to properly measure a mechanical seal
Products from the same category
$-9.12
1042718
Pre-order only