- Home
- Industrial pumps
- Pumps by manufacturer
- SAER
- SAER FC centrifugal pumps with two impellers
SAER FC centrifugal pumps with two impellers

Centrifugal pumps with two impellers this series can be used in for industrial and domestic purposes, for pumping water into reservoirs and for irrigating vegetable gardens and orchards.
Specifications:
- feed up to 18 m³/hour;
- head up to 96 m;
- used for pumping clean water and chemically non-aggressive liquids without abrasive inclusions;
- temperature of the pumped-over liquid: 15 °С to +70 °C;
- maximum ambient temperature: 40 °С;
- maximum working pressure: 10 bar;
- permissible hydraulic values according to UNI /ISO 2548-Class C Annex B, CEI Electrical Specifications .;
- the operating parameters listed in the catalog ensure long service life of the pump when pumping clean water with a density of 1000 kg /m3;
- gaugesuction depth up to 8 m, for a manometric suction depth over 5m, it is recommended to install a suction line with an inner diameter larger than the diameter of the pump suction pipe.
SAER FC-20
Specifications:
- supply up to 5 cubic meters /hour;
- head up to 46 m;
- it is used for pumping clean water and chemically non-aggressive liquids without abrasive impurities;
- suction depth up to 8m.
SAER FC-25
Specifications:
- supply up to 10 cubic meters /hour;
- head up to 66 m;
- it is used for pumping clean water and chemically non-aggressive liquids without abrasive impurities;
- suction depth up to 8m.
SAER FC-30
Specifications:
- supply up to 18 cubic meters /hour;
- head up to 93 m;
- it is used for pumping clean water and chemically non-aggressive liquids without abrasive impurities;
- suction depth up to 8m.
Constructive characteristics
- the pump body is made of cast iron;
- the impeller is made of brass;
- mechanical seal made of ceramic and graphite;
- closed type electric motor, suitable for continuous operation, equipped with a fan for outdoor cooling; in single-phase motors with a working capacitor, a built-in thermal protection is provided device (on request);
- degree of protection: IP 44 (on request IP55);
- insulation class: F;
- standard voltage: 230V-50Hz for single-phase motors;
- 230V /400V-50 Hz for three-phase motors up to 4 kW;
- 400V /690V-50 Hz - over 4kW;
- other voltages and frequencies on special request.
Dimensions (edit)
This category does not contain any products.