Pump for fat | page: 2
Pumps for vegetable and animal fat. Fats have different characteristics of viscosity and boiling or melting point. The selection of pumps for these products must be made in accordance with the requirements of technological production, taking into account the washing and disinfection of equipment.
Fat is lighter than water. Fats do not dissolve in water, but dissolve well in other liquids, such as solvents. Glycerin and soap are produced on the basis of fats. Fat pumps are used to calculate the pumping temperature and lift height.
Pre-order only
Vendor code: 1027647
| Producer | SOLTEC |
| Pump capacity, cu.m/hour | 15 |
| Feed height, m | 60 |
| Power capacity, kW | 5,5 |
| Rate of turn, rpm | 307 |
$11,028.79
Pre-order only
Vendor code: 1027648
| Producer | SOLTEC |
| Pump capacity, cu.m/hour | 30 |
| Feed height, m | 40 |
| Power capacity, kW | 11 |
| Rate of turn, rpm | 286 |
$14,915.28
Pre-order only
Vendor code: 1040485
| Flow Rate, L/rev | 0,125 |
| Producer | KUPAR |
| Pump capacity, cu.m/hour | 2 |
| Power capacity, kW | 1,5 |
| Material | AISI 316 stainless steel |
$6,253.32
Pre-order only
Vendor code: 1040486
| Flow Rate, L/rev | 0,333 |
| Producer | KUPAR |
| Pump capacity, cu.m/hour | 5 |
| Power capacity, kW | 3 |
| Material | AISI 316 stainless steel |
$6,914.29
Pre-order only
Vendor code: 1040487
| Flow Rate, L/rev | 0,667 |
| Producer | KUPAR |
| Pump capacity, cu.m/hour | 11 |
| Power capacity, kW | 5,5 |
| Material | AISI 316 stainless steel |
$8,554.97
