ABS filter nozzle
The filter head is a water distribution system at the bottom of the filter tank, which can effectively remove the sediment and debris in the filter tank, and ensure the normal quality of the water in the filter tank.
Application
The filter head/filter cap is one of the relatively new devices for backwashing water and distributing air in the filter tank. This material uses ABS engineering plastics, which is durable, has good durability, crack deformation, uniform distribution, reasonable layout, improved the hydraulic performance of the filter head, to reduce water head loss, wash the area without dead angle, no dirt, This device is characterized by the reverse effect flushing with gas water, saving water and energy.
Product category
According to the flow rate, the filter cap can be divided into three types: 0.25t/h, 0.5t/h, 1t/h, long handle, medium handle and short handle. According to the shape can be divided into column, hemispherical shape, plum blossom shape, leaf shape, according to the interface, there are two kinds of outer and inner wire.
| Name | Waste Water Treatment Methods, Plastic Filter Nozzle, Sand Filter Nozzle | |||
| Components | Housing, filter cap, circlip and seat | |||
| Material | ABS, PP, SS 316 | |||
| Customization | Available in various standard designs or can be | |||
| Type | Housing diameter and height | Cut Width | Retaining ring diameter | Rod thread |
| BSFN-1 | 29/240 mm | 0.4 mm | No data | 3 mm |
| BSFN-2 | 20/43 mm | 0.3 mm | 25 mm | 1.5mm |
| BSFN-3 | 32/50 mm | 0.25 mm | 60 mm | 1.5mm |
| BSFN-4 | 29/100 mm | 0.4 mm | No data | 3 mm |
| BSFN-5 | 25/48 mm | 1 mm | 45-46 mm | 1.5mm |
| BSFN-6 | 23/48 mm | 0.25 mm | 46 mm | 2.5mm |
| BSFN-7 | 25/48 mm | 0.25mm | 45-46 mm | 1.5mm |
| BSFN-8 | 25/48 mm | 0.25mm | 54-55 mm | 1.5mm |
| Application | It is used in all filtering and drainage systems and can be active in the treatment of sand, anthracite, activated carbon. | |||
| Peculiarities | 1. Precise dimensions 2. Corrosion resistance 3. Sturdy construction | |||
| Package | 1. Inner layer: plastic bag | |||
| 2. Middle layer: polyethylene layer | ||||
| 3. Outer layer: carton/folded wooden case | ||||
| Description of Component Functions | 1. Body cuts: provide head cost control | |||
| 2. Retaining ring: to fix the position of the connection between the filter nozzle and the side pipe or suspended floor | ||||
| Producer | BTS Engineering |
| Material | PP |
| Height, mm | 240 |
| Diameter, mm | 29 |
| Nozzle type | Фильтровальная насадка (ABS Filter Nozzle) |
| Producer | BTS Engineering |
| Material | PP |
| Height, mm | 43 |
| Diameter, mm | 20 |
| Nozzle type | Фильтровальная насадка (ABS Filter Nozzle) |
| Producer | BTS Engineering |
| Material | PP |
| Height, mm | 50 |
| Diameter, mm | 32 |
| Nozzle type | Фильтровальная насадка (ABS Filter Nozzle) |
| Producer | BTS Engineering |
| Material | PP |
| Height, mm | 100 |
| Diameter, mm | 29 |
| Nozzle type | Фильтровальная насадка (ABS Filter Nozzle) |
| Producer | BTS Engineering |
| Material | PP |
| Height, mm | 48 |
| Diameter, mm | 25 |
| Nozzle type | Фильтровальная насадка (ABS Filter Nozzle) |
| Producer | BTS Engineering |
| Material | PP |
| Height, mm | 48 |
| Diameter, mm | 23 |
| Nozzle type | Фильтровальная насадка (ABS Filter Nozzle) |
| Producer | BTS Engineering |
| Material | PP |
| Height, mm | 48 |
| Diameter, mm | 25 |
| Nozzle type | Фильтровальная насадка (ABS Filter Nozzle) |
| Producer | BTS Engineering |
| Material | PP |
| Height, mm | 48 |
| Diameter, mm | 25 |
| Nozzle type | Фильтровальная насадка (ABS Filter Nozzle) |
