GEA TUCHENHAGEN - mechanical seal
Supplies of analogue mechanical seals for GEA Tuchenhagen pumps
End caps for:
- centrifugal pumps Variflow TP, KN, TPS;
- rotary piston pumps VPSH, VPS, VPSU;
- GEA Tuchenhagen AG, ZG, AR, ZR, VPB, VPC, VPD, Jabsco TP, JB, LH32, LH34, LH42, LH44, LH52, LH62, LH64.
The design of the mechanical seal consists mainly of two parts: a movable part and a fixed part. The fixed part is usually a ring that is fixed in the pump housing. The movable part is mounted on the shaft and is pressed against the fixed part by means of a spring.
Mechanical sealing is achieved using secondary seals (bellows, rubber rings) and a friction pair.
R-GEA01
R-GEA02
R-GEA03
R-GEA04 
In stock
Vendor code: 1053888
| Shaft diameter | 25 |
| Outer diameter of the fixed ring, mm | 40 |
| Producer | BTS Engineering |
| Stationary and rotating face | CAR/SIC |
| Material of metal part | AISI 304 stainless steel |
$88
Pre-order only
Vendor code: 13734_25__CAR/SIC__VITON__304
| Producer | BTS Engineering |
| Shaft diameter | 25 |
| Rubber type | VITON |
| Stationary and rotating face | CAR/SIC |
| Material of metal part | 304 |
$88
Pre-order only
Vendor code: 13734_30__CAR/SIC__VITON__304
| Producer | BTS Engineering |
| Shaft diameter | 30 |
| Rubber type | VITON |
| Stationary and rotating face | CAR/SIC |
| Material of metal part | 304 |
$106
Pre-order only
Vendor code: 1053889
| Shaft diameter | 30 |
| Producer | BTS Engineering |
| Stationary and rotating face | CAR/SIC |
| Material of metal part | AISI 304 stainless steel |
| Seal type | R-GEA |
$106
Pre-order only
Vendor code: 1010352
| Shaft diameter | 85 |
| Outer diameter of the fixed ring, mm | 110 |
| Type of conta-ring | G9 |
| Producer | BTS Engineering |
| Stationary and rotating face | SIC/SIC/SIC/SIC |
$830
