In-line pumps BT | page: 2
Inline-BT-Flansch-Umwälzpumpen
Flanged circulation pumps (with linear nozzles) are intended for use in closed or open heating systems with forced circulation of the heat carrier. Unlike from pumps with a wet rotor, in these pumps the liquid does not come into contact with the motor. Circulating pumps have suction and discharge nozzles on the same axis and have the same nominal bore. Pumps circulating ones are equipped with standard air-cooled asynchronous electric motors.
Characteristic
Application: heating supply, irrigation, cooling and circulation in central heating and hot water systems water supply, fire extinguishing systems, booster systems, systems for water treatment, irrigation, supply hot and cold water in heating, cooling and air conditioning systems, for powering boilers, pumping clean liquids that do not contain abrasive impurities and are not aggressive for materials from which the pump is made. The pump is ideal for pumping clean water and other chemically and mechanically non-aggressive liquids. If you intend to pump a liquid whose density and/or viscosity differs from the same water parameters, then due to the change in hydraulic power, it is necessary to take into account the power of the electric motor required in this case.
Analogues: WILO IL, GRUNDFOS TP, Sprut 3VP, Calpeda NR/NRM, DAB ALM-ALP, ALME-ALPE, CM-DCM, CP-DCP, KLM-KLP- DKLM-DKLP, KLME-KLPE-DKLME-DKLPE, CME -DCME, CPE-DCPE, Ebara LPS. Speroni, Pentax MSV, Nocchi Pentair Water A2L, Ferbo, Bombas, Aquatica, Leo, Lowara, Varna, Taifu, Katran, Pumps +, HALM, Calpeda, Pumps plus equipment, Wetron, IMP PUMPS, Shimge, Womar, Optima.
In In-Line VT series pumps, the branch pipes are on the same axis and have the same nominal bore DN. For everyone models use IEC standard motors.
Materials
Impellers and casing are made of chrome-plated ductile iron.
Range of BT pumps
| Producer | BTS Engineering |
| Pump capacity, cu.m/hour | 27 |
| Feed height, m | 35 |
| Power capacity, kW | 3 |
| Material | cast iron |
| Producer | BTS Engineering |
| Pump capacity, cu.m/hour | 36 |
| Feed height, m | 14 |
| Power capacity, kW | 1,1 |
| Material | cast iron |
| Producer | BTS Engineering |
| Pump capacity, cu.m/hour | 42 |
| Feed height, m | 18 |
| Power capacity, kW | 1,5 |
| Material | cast iron |
| Producer | BTS Engineering |
| Pump capacity, cu.m/hour | 48 |
| Feed height, m | 24 |
| Power capacity, kW | 2,2 |
| Material | cast iron |
| Producer | BTS Engineering |
| Pump capacity, cu.m/hour | 42 |
| Feed height, m | 31 |
| Power capacity, kW | 3 |
| Material | cast iron |
