Horizontal high pressure pumps MEDANA, MHI | Prom-nasos.com.ua

Appointment

High pressure pumps WILO MHI are used for pumping drinking water, cold and hot water in heat and water supply systems, condensate, a mixture of water with glycol (up to 40% glycol in the mixture), as well as other media free of mineral fats, abrasive and long-fibred inclusions.

Application of high pressure pumps MHI: installation of water supply and raising pressure, boiler feed, industrial circulation systems, water cooling circuits, fire extinguishing systems, as well as washing and irrigation installations.

Catalog

Diagram productivity

Designation

Example:MHI 205N-1/E/3-400-50-2
MHI	Horizontal multistage high-pressure centrifugal pump
2	Consumption in m³/h
05	Number of impellers
N	IE2 motor
1	Material 1=1.4301 (AISI 304) 2=1.4404 (AISI 316L)
E	Sealing type E=EPDM V=FKM (Viton)
3	1=1 ~ (single phase current) 3=3 ~ (three-phase current)
400	Connectable voltage in V
50	Frequency in Hz
2	Number of poles

Pumps increasing pressure series MHI

Model	Power, kWt	Feed, m³/hour	Head, m	Picture
MHI 202	0.55	5	25
MHI 203	0.55	5	35
MHI 204	0.55	5	45
MHI 205	0.75	5	55
MHI 206	1.1	5	65
MHI 402	0.55	8	25
MHI 403	0.55	8	35
MHI 404	0.75	8	45
MHI 405	1.1	8	55
MHI 406	1.5	8	70
MHI 802	0.75	12	25
MHI 803	1.1	12	35
MHI 804	1.5	12	45
MHI 805	1.85	12	60
MHI 1602	1.5	25	25
MHI 1603	1.85	25	35
MHI 1604	2.5	25	45

Technical data

	WILO MHI
	2 ...	4...	8...	16...
Permissible pumped liquids
Potable and industrial water, water systems heating	Yes
Condensate	Yes
Water-glycol mixture (up to 40% by volume glycol content, from 10%, motor power adjustment is required)	Yes
Other low-viscosity liquids (without abrasive and long-fiber inclusions that destroy the pump)	Yes
Performance (at 50 Hz)
Max flow [m³/hour]	5	8	12	25
Max. head [m]	70	70	60	47
Pumped liquid temperature [^aboutFROM]	from -15 to +110
Ambient temperature [^aboutFROM]	40
Working pressure [bar]	ten
Inlet pressure [bar]	6
Max. rotation speed [rpm]	2950
Motor
Electrical connection 1^~[V /Hz] (voltage tolerances ± 10%)	230/50 or 220/60
Electrical connection 3^~[V /Hz] (voltage tolerances ± 10%)	230/50 ∆ or 220/60 ∆ 400/50 Y or 380/60 Y
Insulation class	F
Interference	EN 61800-3
Degree of protection	IP 54
Accession
Connection diameter on the pressure side [Rp]	1	1	1¼	1½
Materials
Working wheel	1.4301 /1.4404
Step chambers	1.4301 /1.4404
Pump housing	1.4301 /1.4404
Shaft	1.4404
Seals	EPDM (EP 851) /Viton
case cover	1.4301 /1.4404
Sliding mechanical seal	Graphite /Carbide tungsten
Pressure shroud	1.4301 /1.4404
Bearing	Wolfram carbide
Pump base	Aluminum

Explanations for inlet pressure: maximum pressure on inlet is calculated as the maximum operating pressure of the system minus the maximum pressure generated by the pump at Q=0.

Explanations for the materials used: steel 1.4301 complies with AISI 304, steel 1.4404 corresponds to AISI 316L.

MHI