Mechanical seal R-APV-01
Mechanical seal R-APV-01
APV is part of the SPX FLOW brand. APV pumps (centrifugal, induction, rotary) are designed for industrial solutions in the production of beverages (alcoholic, non-alcoholic, dairy products), food, pharmaceutical industry, petrochemicals, water supply, etc.
Mechanical seals R-APV-01 for A.P.V. pumps. World®: APV W +, APV W + 10/8, APV W + 22/20, W + (NEMA), APV W + 30/80, APV W + 35/35, APV W + 30/120, APV W + 50/8, APV TMP +, APV W + 25/210, APV W + 55/35, APVW + 60/110, APV W + 65/350, APV W + 70/40, APV W + 80/80, APV W + 110/130, APV Wa + always available (shaft seal: silicon carbide, graphite, elastomer: EPDM, Viton).
Analogs: Vulcan 16 plus, Flowserve AWP, AWS, Aesseal T0W, P06, BP06, T0R, T0WD, T0WP
Temperature: -20°~180°
Pressure: ≤2.5 MPa
Speed: ≤15 m/s
Materials:
- Rotary ring: Carbon/SIC/TC;
- Stationary ring: Carbon/SIC/TC;
- Bellows: VITON/EPDM.
| d1 | d7 | L1 | L2 | |
| R-APV-01-25 | 25 | 46 | 11.5 | 17.5 |
| R-APV-01-35 | 35 | 56 | 11.5 | 17.5 |
| R-APV-01-44 | 44 | 45 | 30.5 | 12 |
| Producer | BTS Engineering |
| Shaft diameter | 25 |
| Rubber type | VITON |
| Stationary and rotating face | SIC/SIC |
| Seal type | R-APV-01 |
| Producer | BTS Engineering |
| Shaft diameter | 35 |
| Rubber type | EPDM |
| Stationary and rotating face | SIC/SIC |
| Seal type | R-APV-01 |
| Producer | BTS Engineering |
| Shaft diameter | 25 |
| Rubber type | EPDM |
| Stationary and rotating face | SIC/SIC |
| Seal type | R-APV-01 |
| Producer | BTS Engineering |
| Shaft diameter | 35 |
| Rubber type | VITON |
| Stationary and rotating face | SIC/SIC |
| Seal type | R-APV-01 |
| Producer | BTS Engineering |
| Shaft diameter | 44 |
| Rubber type | EPDM |
| Stationary and rotating face | SIC/SIC |
| Seal type | R-APV-01 |
