Pumps for ammonia water, ammonium hydroxide NH4OH

Pump for ammonia water and dissolved urea, urea

For agriculture, it is possible to use roller pumps, pumps from the drive of the power take-off shaft, stainless steel pumps for systems for the preparation of liquid fertilizers, for the introduction of aqueous ammonia into the soil. According to the characteristics and requirements of the durability of materials, these pumps are made of cast iron and carbon steel.

Technical water ammonia NH₃H₂O GOST 9-92

Technical aqueous ammonia is a solution of technical ammonia.

Application: in agriculture, as a liquid fertilizer with an ammonium nitrogen content of 20,5%. From an economic point of view, nitrogen of this type of fertilizer is the cheapest. The highest effect from the use of ammonia water is achieved when applied to the soil in autumn, it is not washed out by precipitation, or in the pre-sowing period in spring. Aqueous ammonia when applied to the soil can be used for all household crops. Ammonia nitrogen is better retained by the soil than ammonium nitrogen of solid fertilizers. Ammonia water is a good fertilizer for potatoes, beets, cereals and vegetables, perennial grasses. By increasing the yield, ammonia water is not inferior to solid ammonia-nitrate fertilizers. In animal husbandry - for the ammonization of feed. In industry, it is used in the production of dyes, soda ash, in the electrical production of manganese, ferroalloys, the medical industry, and everyday life. It is produced in two brands: A - for industry, B - for agriculture

Carbamide CO(NH₂)₂ GOST 2081-2010

Carbamide (urea) - white or slightly colored granules, obtained from ammonia and carbon dioxide.

Application: in the agriculture as the fertilizers. Compared with other nitrogen fertilizers, carbamide consist the highest content of nitrogen (46.2%), that specifies the cost-effectiveness of its usage as the fertilizer for a lot id agricultural cultures on any ground, and also as the addative for the ruminant animals fodders. It can be applied in the industry for the obtaining of melamine, cyanuric acid, amino-formaldehyde resins, pharmaceuticals, as the component of cosmetic preparations.